English
Machinery & Applicators
Accessories
Brand :
Nozzles
Flat Fan Nozzle - Series - 110 SF
Series - 110 JSF

Produce an extraordinary spray deposit at pressures ranging from 1.5 - 4 kgf/cm2. At higher pressures, these nozzles provide better penetration and coverage with small droplets. At lower pressures, drift is reduced by decreasing the number of the small droplets.

Flat Fan Nozzle - Series - 110 SF
Series - 110 JUF

At lower pressures (15 PSI) drift is reduced by generating large droplets, thus maintaining an excellent deposit pattern. At higher pressures (40 PSI), these nozzles provide better penetration and coverage with small droplets. These nozzles are made of KematalTM which provides extraordinary flow uniformity.

Flat Fan Nozzle - Series - ADI 110
Series - ADI 110

Specifically designed for spray application without drift, even under windy conditions. They produce spray with driftable droplets below 100 micron.

Flat Fan Nozzle - Series - 80 EF
Series - 80 JEF

Recommended for the spray applications on individual strips. With 80° spray angle they deliver a rectangular and narrow spray pattern with uniform distribution along the entire spray width. These nozzles are made of Kematal ™ which is provides extraordinary flow uniformity.

Flat Fan Nozzle - Series - DEF
Series - JDF

These nozzles are precisely moulded in Kematal ™, a highly resistant and stable polymeric material. They are recommended for spray applications demanding large droplets so as to reduce drift by the wind. The nozzles produce wide - angled, narrow flat fan spray pattern at pressure 15 PSI with a relatively uniform distribution.

Flat Fan Nozzle - Series - JA - Hollow Cone
Series - JA - Hollow Cone

Perfect orifice of the nozzles give outstanding spray cone uniformity and flow rate. The nozzles are resistant to most of the corrosive chemicals product, provide perfect stability for flow rate, coverage and droplet size.

Ecovalve - Constant Pressure Valve
Ecovalve - Constant Pressure Valve

New highly sensitive valve that enables maintaining of a constant pressure during spraying and ensuring precise, uniform application of the chemical without excess. With just a few pumpings, the operator can enjoy less effort yet getting a constant output pressure from the valve. The combined pressure of each spring and its corresponding nozzle provides greater efficiency and reduced drift during application. The valve can be completely disassembled to facilitate the cleaning and maintenance.

Personal Protective Equipment
PPE Composition (Knapsack Sprayer)
PPE for Knapsack Sprayer
  • Reusable.
  • Use in preparation and application of crop protection products with knapsack sprayer (manual or motorized sprayer).
  • Consist of pants with PVC legging, apron, shirt, respirator, gloves, Arabian Cap and anti-fog visor.
  • Sizes M, L, XL, XXL.
  • Pant - Mixed cotton and polyester material with water repellent treatment and PVC legging.
  • Shirt - Mixed cotton and polyester material with water repellent treatment.
  • Apron - Made of polyester, screen coated with PVC resin.
  • Respirator - Coal filter with PFF2 VO for organic vapours, expiration valve, rubber bands and aluminium clip for face adjustment.
  • Nitrilic Gloves - Nitrilic latex protect hands against chemical exposure.
  • Arabian Cap - Mixed cotton and polyester material with water repellent treatment and polypropylene brim.
  • Anti-fogging Visor - Cotton and polyester material, band with Velcro, polyester film band and polyurethane forehead.
PPE Composition (Tractor Sprayer)
PPE for Tractor Sprayer
  • Reusable.
  • Use in preparation and application of crop protection products with tractor (tractor mounted and self - propelled sprayer).
  • Consist of pants with PVC legging, shirt, respirator, gloves, Arabian Cap and anti-fog visor.
  • Sizes M, L, XL, XXL.
  • Pant - Mixed cotton and polyester material with water repellent treatment and PVC legging.
  • Shirt - Mixed cotton and polyester material with water repellent treatment.
  • Respirator - Coal filter with PFF2 VO for organic vapours, expiration valve, rubber bands and aluminium clip for face adjustment.
  • Nitrilic Gloves - Nitrilic latex protect hands against chemical exposure.
  • Arabian Cap - Mixed cotton and polyester material with water repellent treatment and polypropylene brim.
  • Anti-fogging Visor - Cotton and polyester material, band with Velcro, polyester film band and polyurethane forehead.