Agricultural Chemicals > Products & Services > Machinery & Applicators > Accessories
Produce an extraordinary spray deposit at pressures ranging from 1.5 – 4 kgf/cm2. At higher pressures, these nozzles provide better penetration and coverage with small droplets. At lower pressures, drift is reduced by decreasing the number of the small droplets.
At lower pressures (15 PSI) drift is reduced by generating large droplets, thus maintaining an excellent deposit pattern. At higher pressures (40 PSI), these nozzles provide better penetration and coverage with small droplets. These nozzles are made of KematalTM which provides extraordinary flow uniformity.
Recommended for the spray applications on individual strips. With 80° spray angle they deliver a rectangular and narrow spray pattern with uniform distribution along the entire spray width. These nozzles are made of Kematal ™ which is provides extraordinary flow uniformity.
These nozzles are precisely moulded in Kematal ™, a highly resistant and stable polymeric material. They are recommended for spray applications demanding large droplets so as to reduce drift by the wind. The nozzles produce wide – angled, narrow flat fan spray pattern at pressure 15 PSI with a relatively uniform distribution.
Perfect orifice of the nozzles give outstanding spray cone uniformity and flow rate. The nozzles are resistant to most of the corrosive chemicals product, provide perfect stability for flow rate, coverage and droplet size.
For crop safety, these nozzles produce large droplets which minimize contamination risks to the environment & the operator. Excellent products distribution with spray angle 110° at 45 PSI, it will reduce the high possibilities cause phytotoxic to crop due to off target.
Ideal for systemic pre-emergent & post-emergent applications. A pre-orifice reduces formation of droplets that are susceptible to drift which will reduce the risk of contamination the environment. With 110° spray angle, they deliver wide spray pattern at 45 PSI. It provides great pattern of drop deposition & coverage. There is a low risk of evaporeting while using herbicide & move safety for the operator.
Perfect for application of pesticides & foliar fertilizer which generates fine droplets at 45 PSI. It allows for quick charge from a wide cone to a solid stream without a step by twist of the tip. The yellow is the smallest good for areas with little or no wind small droplet sizes. The next size is red then blue is the largest. All of them are adjustable.
New highly sensitive valve that enables maintaining of a constant pressure during spraying and ensuring precise, uniform application of the chemical without excess. With just a few pumpings, the operator can enjoy less effort yet getting a constant output pressure from the valve. The combined pressure of each spring and its corresponding nozzle provides greater efficiency and reduced drift during application. The valve can be completely disassembled to facilitate the cleaning and maintenance.
Reusable.
Use in preparation and application of crop protection products with knapsack sprayer (manual or motorized sprayer).
Consist of pants with PVC legging, apron, shirt, respirator, gloves, Arabian Cap and anti-fog visor.
Sizes M, L, XL, XXL.
Pant – Mixed cotton and polyester material with water repellent treatment and PVC legging.
Shirt – Mixed cotton and polyester material with water repellent treatment.
Apron – Made of polyester, screen coated with PVC resin.
Respirator – Coal filter with PFF2 VO for organic vapours, expiration valve, rubber bands and aluminium clip for face adjustment.
Nitrilic Gloves – Nitrilic latex protect hands against chemical exposure.
Arabian Cap – Mixed cotton and polyester material with water repellent treatment and polypropylene brim.
Anti-fogging Visor – Cotton and polyester material, band with Velcro, polyester film band and polyurethane forehead.
Reusable.
Use in preparation and application of crop protection products with tractor (tractor mounted and self – propelled sprayer).
Consist of pants with PVC legging, shirt, respirator, gloves, Arabian Cap and anti-fog visor.
Sizes M, L, XL, XXL.
Pant – Mixed cotton and polyester material with water repellent treatment and PVC legging.
Shirt – Mixed cotton and polyester material with water repellent treatment.
Respirator – Coal filter with PFF2 VO for organic vapours, expiration valve, rubber bands and aluminium clip for face adjustment.
Nitrilic Gloves – Nitrilic latex protect hands against chemical exposure.
Arabian Cap – Mixed cotton and polyester material with water repellent treatment and polypropylene brim.
Anti-fogging Visor – Cotton and polyester material, band with Velcro, polyester film band and polyurethane forehead.
A special feature of this nozzle is its capability of spraying small amounts (25 litres per 1000 m2). Spray chemicals turns white as it hits onto target area. This enable operator to ensure complete spray coverage by just inspect white colour coverage via visualization.
Produces a very soft and fine atomized mist droplets. Suitable for use on ornamental and vegetables farm.
This nozzle produces a 120° flat fan at a low (manual) pressure. Very uniformed distribution, with minimal drift. Light weight and easy to spray.
This nozzle can generate two spraying patterns, narrow (straight jet) and wide (flat fan). Switching between the two can be done with an easy-to-use lever handle (trigger). By utilising two different spraying patterns, one can ensure a more thorough spray distribution.
New sector spray nozzle disc which made by stainless steel enhances the durability & long-life of the nozzles which is operated under the high pressure. With different spray pattern & how rate will meet all the farmer requirements for any crop & condition use.
For examples : NN-D-5S, NN-D-65, NN-D-75, NN-C-35S, N-C-65, NN-B-6S, NN-B-7S, NN-ZV-20.
Stainless steel adjustable cone nozzles covers a wide range of targets, both near & far, with excellent control. Lightweight body reduces workload, ideal for use in both orchards, vegetable & rice fields.
Produces a 60° flat-fan shaped, air-assisted fine spray ideal for use onto bushes & vines, such as cucumber, tomato & eggplants. Excellent drift control, fine & secure attachment onto crops.
Produces a 80° flat-fan spraying pattern ideal for fruits & vegetables on bushes. Minimal drift & very uniform distribution keeps impact to adjustment areas to a minimum. Nozzle head is made of ceramic, which makes it very durable & ati abrasive.
This nozzle can generate two spraying patterns, narrow (straight jet) and wide (flat fan). Switching between the two can be done simply by turning the knob at the grip. By utillising two different spraying patterns, one can ensure a more thorough spray distribution.
Perfect for pesticide application as well as for the cleansing of tree leaves. Its superior reach (both horizontally and vertically) makes it ideal for use in far distance coverage such as spraying in chestnut farms, road side trees and bushes, and even the golf course. Switching between narrow (straight jet) and wide (cone) can be done simply by turning the knob at the handle.
This nozzle has two booms; one for near and mid-distance targets (5 nozzles at hand) and the other for far target (a nozzle on the tip), both with individual nozzle tube. The ease of interchanging the two types of spraying patterns lead to greater efficiently.
A versatile aluminium boom sprayer that can be used for both near and far targets, and expandable upwards towards the operator. It performs excellently while spraying in orchard where normal sprayers would be blocked by twisting and curving branches. eg: Orange orchard.
